10.7 Standards
Relevant to Technical Ceramics
10.7.1 General
DIN 40680-1 (08.83) Ceramic parts for electrical
engineering;
General tolerances for dimensions
DIN 40680-2 (08.83) Ceramic parts for electrical
engineering;
General tolerances for form
DIN 40686-1 (08.83) Surfaces of dense ceramic parts for electrical
engineering; general
DIN 40686 insert 1 (08.83) Surfaces of dense ceramic parts
for electrical engineering; specifications on drawings
DIN 40686 insert 2 (08.83) Surfaces of dense ceramic parts
for electrical engineering; measuring roughness
DIN 40686-4 (08.83) Surfaces of ceramic parts for electrical
engineering; the inspection of metallisation for soft soldering
DIN 40686-5 (08.83) Surfaces of ceramic parts for electrical
engineering; the inspection of metallisation for hard soldering
DIN 40686-6 (08.83) Surfaces of dense ceramic parts for electrical
engineering; high and low voltage insulators
DIN 40686-7 (08.83) Surfaces of dense ceramic parts for electrical
engineering; insulators
DIN EN 12212 (12.02) High-performance ceramics – a unified
method for classification
DIN V ENV 14232 (05.02) High performance ceramics –
terminology, definitions and abbreviations
DIN EN ISO 13565-1 (04.98) Geometrical product specifications
(GPS) – surface quality: Contact stylus procedure –
surfaces with plateau-like, functionally relevant properties
– Part 1: Filtering and general measurement conditions
DIN EN ISO 13565-2 (04.98) Geometrical product specifications
(GPS) –surface quality: Contact stylus procedure –
surfaces with plateau-like, functionally relevant properties
– Part 2: Description of the height using a linear representation
of the material ratio curve
DIN EN ISO 13565-3 (08.00) Geometrical product specifications
(GPS) – surface quality: Contact stylus procedure –
surfaces with plateau-like, functionally relevant properties
– Part 3: Description of the height of surfaces using
the probability density curve
DIN EN 60672-1 (05.96) Ceramic and glass insulating materials
–
identical to IEC 60672-1 Part 1:Definitions and group classification
DIN EN 60672-2 (10.00) Ceramic and glass insulating materials
–
identical to IEC 60672-2 Part 2:Test procedures
DIN EN 60672-3 (02.99) Ceramic and glass insulating materials
–
identical to IEC 60672-3 Part:Specifications for individual
materials
DIN ISO 1101 (08.95) Technical drawings; shape and positioning
tolerance; shape, direction, location and run-out tolerances;
general, definitions, symbols, entries on drawings
DIN ISO 2768-1 (06.91) General tolerances; tolerances for
lengths and angular dimensions without individual tolerance
entries
DIN ISO 2768-2 (04.91) General tolerances; tolerances for
shape and position without individual tolerance entries
DIN ISO 286-1 (11.90) ISO system for limiting dimensions and
fits; principles of tolerances, dimensions and fits
DIN ISO 286-2 (11.90) ISO system for limiting dimensions and
fits; tables of basic tolerance levels and limiting dimensions
for holes and shafts
DIN EN ISO 1302 (06.02) Geometrical product specification
(GPS) – specifications of surface quality in technical
product documentation
ISO 9000 (05.90) Quality management and quality assurance
standards; Guide for selection and application
ISO 15165 (10.01) High-performance ceramics; classification
system
DVS 3102 (02.93) The fabrication of ceramic-ceramic and ceramic-metal
bonds through active soldering
VDI/VDE 2603 (09.90) Surface measurement procedures; measuring
the bearing area ratio
VDI/VDE 2604 (06.71) Surface measurement procedures; examining
roughness through interference microscopy
|
|
